Prevest Model Pro resin is a light-curing material for the 3D printing of dental prosthodontic  and orthodontic models for use in LCD, DLPand SLA 3D printers as reactive to wavelength of light between 385nm and 405nm.

Indications

It is used for fabricated of 3D crown and bridge models, orthodontic models, diagnostic model and implant analog models.

Benefits

• High Flexural strength and modulus
• Fast printing speed
• Easy to separate from thermoforming
  materials
• Color contrast models for maximum
  visibility of small details

Chemistry

Methacrylates, Photo-initiator, Inhibitor and Pigment.

Technical data

1. Flexural Strength ≥55 Mpa
2. Flexural Modulus ≥2.5 Gpa

ASTM D790-15 (Method-B)

Viscosity 500 - 2000mPa.s
Heat Stability upto 130⁰C

Presentation

Prevest Model Pro is available in Beige colours
Ref : 18022, 250g Bottle
Ref : 18023, 500g Bottle
Ref : 18024, 1000g Bottle

The post Model Pro appeared first on Prevest DenPro Limited.

Prevest Burn Out 3D Resin material is an easy burnout material for printing cast crowns, bridges, and frameworks of all kinds. The printed material can be burned out without leaving any residue. The specialty of material is accurate fitting with smooth production sequence and reproducible results.

The material is designed to print at 50 micron and 100 micron using LCD/DLP& SLA printers. Available in Red color.

Indications

It is used for 3D printing of burn out frames in Casting of partial dentures, crowns and bridges, inlays, onlays and veneers.

Benefits

• Easy to work and accurate
• Suitable for casting copings, substructures,
  crowns, and more
• Burns clean with no residue left after burnout

Chemistry

Functional (Meth)acrylic resins, Photoinitiators and Pigments

Technical data

1. Flexural Strength > 60 MPa
2. Flexural Modulus > 1500 MPa

Residual Ash Content 0.1%

Presentation

Prevest Burn Out Resin is available in Violet Color.
Ref : 18019, 250g Bottle
Ref : 18011, 500g Bottle
Ref : 18012, 1000g Bottle

The post Burn Out appeared first on Prevest DenPro Limited.

Prevest Surgical Guide is a high precise and more accurate 3D printing material used for fabrication of templates for implant surgery. The material is biocompatible and fulfills Class I requirements. The high accuracy in printing enables easy pilot drilling after printing. The material is designed to print at 50 micron & 100 micron using LCD/DLP/SLA printers.

Indications

It is a photopolymer resin used for 3D printing dental surgical guides to aid in dental implant placement procedure.

Benefits

• Autoclavable
• Easy chemical disinfection
• Fast printing
• Clear and nice aesthetic appearance
• High flexural strength

Chemistry

Methacrylates, Photo-initiator, Inhibitor and Pigment.

Technical data

1. Flexural Strength >110 Mpa
2. Flexural Modulus >2.5 GPa

ASTM D790-15 (Method-B)

Viscosity 310 - 380 mPa.s

Presentation

Prevest Surgical Guide Resin is available in clear transparent appearance.
Ref : 18020, 250g Bottle
Ref : 18003, 500g Bottle
Ref : 18004, 1000g Bottle

The post Surgical Guide appeared first on Prevest DenPro Limited.

Prevest C&B, Ceramic Resin is a Nano ceramic filled hybrid material at 50% content composition. This specialized 3D resin material is developed for high flexural & compressive strength making Prevest C&B, Ceramic a definitive search for 3D crowns printing. The material is biocompatible and fulfils Class II requirements. The print is easy to finish and polish and gives excellent aesthetics matching existing teeth. The speciality of material is an accurate fitting with smooth production sequence and reproducible results.

The material is designed to print at 50 micron to 100 micron using LCD/DLP/SLAprinters.

Available in A1, A2, A3, A3.5, B1, B2, B3, C2, D3, Bleach and Extra Bleach.

Indications

It is used for the fabrication of 3D printed permanent crown inlays, onlays and veneers.

Benefits

• Low water absorption reduces tendency
  to age and discoloration
• Smooth surface so low plaque accumulation
• Low cold and heat sensitivity
• Fluorescence resembles natural teeth
• Excellent aesthetics
• High flexural and compressive strength
• Radiopaque for clear visibility of restorations
  on radiographs

Chemistry

Methacrylates, Photo-initiator, Inhibitor,Pigment and Fillers.

Technical data

1. Flexural Strength > 190 MPa
2. Flexural Modulus > 4.2 GPa
3. Compressive Strength > 320 Mpa
4. Water sorption 3 - 4.5μg/mm
5. Water solubility 0.5 - 1.8μg/ mm

ISO 4049

Viscosity 2000 - 3800 mPa.s

Presentation

Ref : 18017 : 1 x 250g Bottle
Ref : 18013 : 1 x 500g Bottle
Ref : 18014 : 1 x 1000g Bottle

The post Ceramic appeared first on Prevest DenPro Limited.

Prevest Denture 3D Resin material is a biocompatible Class II material for printing all types of removable denture bases. Material is having excellent mechanical properties which can produce long-lasting, wear-resistant, biocompatible denture bases at a fraction of the cost compared to traditional methods. The speciality of material is accurate fitting with smooth production sequence and reproducible results.

Indications

It is indicated for the fabrication of removable full and partial dentures and base plates

Benefits

• Semi-Translucent, Pink Base shades
• Strong and Wear-Resistant
• Repeatable and Reliable

Chemistry

Methacrylate, Photo-initiators and Pigments

Technical data

1. Flexural Strength > 65 MPa
2. Flexural Modulus > 2000 MPa
3. Water sorption 35 µg/mm
4. Water solubility 3.0 µg/ mm

Presentation

Prevest Denture resin is available in pink Color.
Ref : 18018, 250g Bottle
Ref : 18009, 500g Bottle
Ref : 18010, 1000g Bottle

The post Denture appeared first on Prevest DenPro Limited.

Prevest Model is a way forward in 3D printing more accurate and highly precise model base and dies with easy
fitting and easy attachment of crowns and bridges. The material is developed with high flexural strength and more
heat resistance. The material is ideal for prosthodontic and orthodontic models where high precision is required. The
material is designed to print at 50 micron & 100 micron using LCD/DLP/SLAprinters. Available in Grey Colour

Indications

It is used for fabrication of 3D crown and bridge models, orthodontic models, diagnostic models and implant analog models.

Benefits

• High Flexural strength and modulus
• Fast printing speed
• Easy to separate from thermoforming
  materials
• Color contrast models for maximum
  visibility of small details

Chemistry

Methacrylates, Photo-initiator, Inhibitor and Pigment.

Technical data

1. Flexural Strength >125 MPa
2. Flexural Modulus >3.0 Gpa

ASTM D790-15 (Method-B)

Viscosity: 500 - 600 mPa.s

Heat stability upto 130 C

Presentation

Prevest Model is available in Beige
Ref : 18021, 250g Bottle
Ref : 18001, 500g Bottle
Ref : 18002, 1000g Bottle

The post Model appeared first on Prevest DenPro Limited.

Prevest C&B-Permanent resin is a biocompatible and fulfils Class II requirements. This 3D printing material composed of inorganic fillers which gives high flexural and compressive strength. The print is easy to finish and polish and gives excellent aesthetics matching existing teeth. The speciality of material is accurate fitting with smooth production sequence and reproducible results.

The material is designed to print at 50 micron & 100 micron using LCD/DLP/SLA printers.

Available in shades : A1, A2, A3, B1, B3, C2, and D3.

Indications

It is used for the fabrications of 3D printing of permanent crown inlays, onlays and veneers.

Benefits

• Low water absorption tendency reduces tendency
  to age and discoloration
• Smooth surface so low plaque accumulation
• Low cold and heat sensitivity
• Fluorescence resembles natural teeth
• Excellent aesthetics
• High flexural and compressive strength

Chemistry

Methacrylates, Photo-initiator, Inhibitor and Pigment.

Technical data

1. Flexural Strength >170 Mpa
2. Flexural Modulus >4.2 GPa
3. Compressive Strength 150 MPa
4. Water sorption 3 - 4.5µg/mm
5. Water solubility 0.5 - 1.8µg/ mm

ISO 4049

Viscosity: 2000 - 3800 mPa.s

Presentation

Ref : 18016 : 1 x 250g Bottle
Ref : 18007 : 1 x 500g Bottle
Ref : 18008 : 1 x 1000g Bottle

The post Permanent appeared first on Prevest DenPro Limited.

Prevest C&B-Interim resin is a biocompatible and fulfils Class II requirements. This 3D printing material composed of inorganic fillers which gives high flexural and compressive strength. The print is easy to finish and polish and gives excellent aesthetics matching existing teeth. The speciality of material is accurate fitting with smooth production sequence and reproducible results.

Indications

It is used for 3D printing of temporary crown and bridge restorations, inlays, onlays and veneers.

Benefits

• Low water absorption tendency reduces tendency
  to age and discoloration
• Smooth surface so low plaque accumulation
• Low cold and heat sensitivity
• Fluorescence resembles natural teeth
• Excellent aesthetics
• High flexural and compressive strength

Chemistry

Methacrylates, Photo-initiator, Inhibitor and Pigment.

Technical data

1. Flexural Strength >140 Mpa
2. Flexural Modulus >4.0 GPa
3. Compressive Strength 150 MPa
4. Water sorption 3 - 4.5µg/mm
5. Water solubility 0.5 - 1.8µg/ mm

ISO 4049

Viscosity: 1500-2000 mPa.s

Presentation

Ref : 18015 : 1 x 250g Bottle
Ref : 18005 : 1 x 500g Bottle
Ref : 18006 : 1 x 1000g Bottle

The post Interim appeared first on Prevest DenPro Limited.