ViroWipes is a one-step, ready to use, disposable wipes for the rapid disinfection of the all kinds of wipeable surfaces of non-invasive medical devices and other non invasive instruments and equipments with increased risk of infection.

Key features

• One-step-simply wipe to clean and disinfect surfaces of non-invasive medical devices.
• Revolutionary formula-impregnated with patented blend of antimicrobial compounds in alcoholic solution.
• Leaves no residue on the surfaces
• Fast acting- contact time 30 seconds
• Pleasant orange fragrance

Indications for use

It is used for a rapid disinfection and cleaning of medical devices and surfaces like hand pieces, contra-angles, turbines, scaler inserts etc.

Active ingredients

N-(3-aminopropyl)-N-dodecylpropano-1,3-Diamine, Didecyl-dimethyl Ammonium Chloride, 2- Butoxyethanol Surfactant , IPA, pH modifier, water

Packaging

Ref : 16015
50 Wipes (10x15) in a Tub
Ref : 16016
50 Wipes (15x20) in a Tub
Ref : 16017
80 Wipes (15x20) in a Tub

Recommended usage:

Wipe the equipment with ViroProtect Wipe and massage thoroughly over the surface and provide scrubbing action to ensure good surface contact with the disinfectant. Leave the instruments/equipments to dry. Do not rinse with water and do not mix with any other disinfectant.

The post Viro Wipes appeared first on Prevest DenPro Limited.

ViroShield is a specially formulated, foam free, liquid concentrate for daily cleaning, disinfection and deodorizing medical devices including suction devices and dental unit spittoons.

Key features

• Cost effective-2% dilution
• Bactericidal, fungicidal and virucidal
• Eradicates bad smell
• Does not foam
• Does not contain phenols, aldehydes or chlorine

Indications for use

It is indicated for daily hygiene and disinfection of dental suction systems as a part of their general disinfecting routine.

Active ingredients

Dimethyldioctyl ammonium chloride, N-(3-aminopropyl)-N-dodecylpropano-1,3-Diamine, Quaternary Ammonium Salts, Tetra Potassium Pyrophosphate, Isotridecanol Ethoxylated, 2-Aminoethanol, EDTA, Potassium Hydroxide, Dipropylene Glycol Methyl Ether and IPA.

Packaging

REF. 16001, 1 Litre bottle

REF. 16002, 5 Litre bottle

Recommended usage:

The concentrate is to be diluted with water to 2% concentration. Pass the solution through the suction system once or twice a day. Leave for 15 minutes to take the effect. After disinfection, rinse the suction system with the portable water.

The post ViroShield appeared first on Prevest DenPro Limited.

ViroShield PDR is a powder concentrate for weekly hygiene and disinfection of dental suction systems of all types including their drainage pipes and spittoons.

Key features

• Cost effective powder concentrate
• Bactericidal, fungicidal and virucidal
• Eradicates bad smell
• Does not foam
• Does not contain phenols, aldehydes or chlorine

Indications for use

It is indicated for weekly hygiene and disinfection of dental suction systems as a part of their general disinfecting routine.

Active ingredients

Sodium Percarbonate, Tetraacetylethylenediamine, Citric Acid Anhydrous, Disodium Metasilicate, Alcohol Ethoxylated, Sodium Carbonate, Trisodium Orthophosphate, Enzyme.

Packaging

Ref : 16019, 25g Pouch
Ref : 16003, 500g Jar
Ref : 16004, 1Kg Jar

Recommended usage:

20g powder to be mixed with 1 litre of luke warm water. Aspirate the solution through the high and low volume suction tubes. Leave for 30 minutes. Rinse thoroughly with clean water.

The post ViroShield PDR appeared first on Prevest DenPro Limited.

ViroZym is high efficiency concentrated liquid formula for manual and ultrasonic cleaning and disinfection of medical devices such as dental and medical instruments.

Key features

• Effective with 1% dilution.
• Bactericidal, fungicidal and virucidal.
• Cleans, disinfects and deodorizes in one step.
• Removes stubborn deposits.
• Does not foam
• Does not contain phenols, aldehydes or chlorine

Indications for use

• It is used for manual cleaning and disinfection of dental and medical devices such as rotary and surgical instruments respectively.
• It can also be used in ultrasonic cleaners for high level enzymatic cleaning and disinfection of dental and medical instruments.

Active ingredients

N-(3-aminopropyl)-N-dodecylpropano-1, 3-Diamine , Poly(oxy-1,2-ethanediyl),alpha-[2 (didecylmethylammonio) ethyl]- omega-hydroxy-,propanoate , Didecyldimethylammonium chloride, Isotridecanol, ethoxylated, 2-(2- Butoxyethanol), Subtilisin, thickening agents, emulsifiers and flavoring agents.

Packaging

REF. 16005, 1 Litre bottle

REF. 16006, 5 Litre bottle

Recommended usage:

The concentrate is to be diluted with portable water to 1% concentration. Immerse instruments immediately after use in the solution and soak for 15 minutes. Rinse the instruments with water and dry after disinfection. Discard the used solution daily and prepare fresh solution daily. Do not mix with other cleaning agents or disinfectants.

The post ViroZym appeared first on Prevest DenPro Limited.

ViroPerox is a powder concentrate for cleaning, cold sterilization and disinfection of all kinds of non invasive medical devices.

Key features

• High efficiency concentrated formula for manual and ultrasonic cleaning
• Bactericidal, fungicidal, tuberculocidal, virucidal and sporicidal.
• Exceptionally safe to use- Environment friendly
• Non- carcinogenic- Aldehyde and phenol free.

Indications for use

• It is indicated for quick manual cleaning and disinfection of non-invasive medical devices.
• It can also be used in ultrasonic cleaners for cleaning and disinfection of instruments & equipments with increased risk of infection.

Active ingredients

Sodium Percarbonate, Tetraacetylethylenediamine, Citric Acid Anhydrous, Disodium Metasilicate, Alcohol Ethoxylated, Sodium Carbonate, Trisodium Orthophosphate, Enzyme and pH modifier.

Packaging

Ref : 16018, 25g Pouch Pack
Ref : 16007, 500g Jar
Ref : 16008, 1kg Jar

Recommended usage:

20g powder to be mixed with 1 litre of luke warm water. Soak the instruments for 10 minutes, remove, rinse with water and dry.

The post ViroPerox appeared first on Prevest DenPro Limited.

ViroGuard Foam is an alcohol free formulation for rapid disinfection of alcohol sensitive non invasive medical devices and medical equipments having surfaces made of glass, rubber, acrylic plastic, and artificial leather upholstery.

Key features

• Fast acting, ready-to-use alcohol free spray foam disinfectant
• Bactericidal, fungicidal, tuberculocidal, myco-bactericidal , virucidal
• Leaves no residue after drying
• Does not affect medical equipments
• Suitable for alcohol sensitive materials such as leatherite, plastic 
• Does not contain phenol, aldehydes and chlorine
• Excellent wetting properties

Indications for use

• It is an alcohol free foam spray used for disinfection of alcohol sensitive non invasive medical devices such as dental units, beds, stretchers, work benches etc.
• It can also be used for disinfection of non invasive medical equipments such as monitors, displays, keyboards and control panels etc.

Active ingredients

N-(3-aminopropyl)-N-dodecylpropano-1, 3-Diamine, Didecyl-dimethyl Ammonium Chloride, 2- Butoxyethanol Surfactant , D-Glucopyranose, oligomers, decyl octyl glycosides, Sodium lauroyl sarcosinate, pH modifier and water

Packaging

REF. 16009, 500 ml spray bottle

REF. 16010, 1 Litre bottle

REF. 16011, 5 Litre bottle

Recommended usage:

Spray directly on the surfaces and objects to be disinfected and leave the surfaces wet for 30 seconds for effective disinfection and wipe with the clean lint free disposable cloth. For difficult surfaces such as keyboards, displays, monitors and control panels, use wet clean disposable cloth with spray foam and thoroughly wipe the surfaces.

The post ViroGaurd Foam appeared first on Prevest DenPro Limited.

ViroGuard is ready to use fast acting and broad spectrum spray for quick cleaning and disinfecting of
medical devices and surfaces after each session in medical and dental offices & clinics. It is specially
designed to avoid cross contamination in between patients.

Key features

• Bactericidal, fungicidal, tuberculocidal, mycobactericidal, virucidal
• Fast acting-Active in 30 seconds
• Does not affect the medical equipment
• Leaves no residue after drying
• Does not contain phenols, aldehydes, chlorine or EDTA

Indications for use

It is used for cleaning, decontaminating and disinfecting surfaces such as trolleys, beds, chairs, trays, work benches, examination tables, dental units, handles, spittoons, other non invasive equipment's and instruments.

Active ingredients

N-(3-aminopropyl)-N-dodecylpropano-1, 3-Diamine, Didecyl-dimethyl Ammonium Chloride, 2- Butoxyethanol Surfactant ,IPA , pH modifier and water.

Packaging

REF. 16012, 500 ml spray bottle

REF. 16013, 1 Litre bottle

REF. 16014, 5 Litre bottle

Recommended usage:

Spray directly on the surfaces and objects to be disinfected and leave the surfaces wet for 30 seconds for effective disinfection and wipe with the clean lint free disposable cloth. (Note : Do not rinse)

The post ViroGuard appeared first on Prevest DenPro Limited.