Uncategorized Archives - Prevest DenPro Limited

Fusion Bond 7 Product Description: Fusion Bond 7 / Fusion Self Etch Bond combines the ingredients needed for etching, priming, and bonding into a single adhesive, thereby eliminating separate etching and priming steps of the bonding process. Fusion Bond 7 / Fusion Self Etch Bond adhesive can be used for the bonding of both direct and indirect restorations.

Fusion Bond 7 Composition: Hema Phosphate, Urethane Dimethacrylate, Triethylene Glycol Dimethacrylate,
Bisphenol A Diglycidyl Methacrylate, 2-Hydroxy Ethyl Methacrylate, Water, Tertiary Butanol, Photoinitiators, Stabilizer.

Fusion Bond 7 Indications:

Direct Applications:

1. Light-cured composite and compomer restorations.
2. Composite/ceramic/ metal repairs.
3. Cavity sealing for amalgam restorations.
4. Light-cured or dual-cured core build-ups (always light-cure an incremental build-up of core
material).

Indirect Applications:

1. Veneers 2. Porcelain, composite, and metal-based inlays, onlays, crowns, bridges. 3. Endodontic
posts. 4. Cavity sealing as a pretreatment for indirect restorations.

Fusion Bond 7 Instruction for use:

Bonding Composites/Compomers to Dentin/Enamel Veneers, crowns, bridges, inlays, onlays and metal-based restorations (used in conjunction with a luting cement).

1. Prepare cavity. Wash thoroughly with water spray and air dry (Do not desiccate). Note : For optimal adhesion, always prep (bevel) all enamel and/or margins prior to application of Fusion Bond 7 / Fusion Self Etch Bond adhesive.
2. Shake Fusion Bond 7 / Fusion Self Etch Bond adhesive bottle briefly. Note : Upon first use, shake adhesive bottle vigorously for 20 - 30 seconds.
3. Dispense 2-3 drops of Fusion Bond 7 / Fusion Self Etch Bond adhesive into a clean well. Replace cap immediately after dispensing.
4. Using the disposable applicator brush, apply a generous amount of adhesive to the enamel/dentin surface. Scrub the surface with a brushing motion for 20 seconds.
5. Apply a second application of Fusion Bond 7 / Fusion Self Etch Bond adhesive with a brushing motion for 20 seconds.
6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds with oil-free air.
7. Light cure for 20–30 seconds.
8.Apply composite according to manufacturer’s instructions for use

Fusion Bond 7 Instructions for bonding Indirect Restorations:

1. Clean the preparation. Wash thoroughly with water spray and air dry (Do not desiccate).
2. Shake Fusion Bond 7 / Fusion Self Etch Bond adhesive bottle briefly. Note : Upon first use, shake adhesive bottle vigorously for 10 sec.
3. Bottle Delivery : Dispense 2-3 drops of Fusion Bond 7 / Fusion Self Etch Bond adhesive into a clean well. Replace cap immediately after dispensing.
4. Using the disposable applicator brush, apply a generous amount of adhesive to the enamel/dentin surface. Scrub the surface with a brushing motion for 20 seconds.
5. Apply a second application of Fusion Bond 7 / Fusion Self Etch Bond adhesive with a brushing motion for 20 seconds.
6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds with oil-free air. Avoid pooling of adhesive before light curing. Light cure for 20–30 seconds.

Fusion Bond 7 Contraindications:

1. Do not use Fusion Bond 7 / Fusion Self Etch Bond adhesive if a patient is known to be allergic to
any of the material’s ingredients or if the stipulated working technique cannot be used.
2. Fusion Bond 7 / Fusion Self Etch Bond adhesive must not be used in conjunction with purely self
curing composite materials. Dual-curing materials must be light activated.
3. Do not use Fusion Bond 7 / Fusion Self Etch Bond adhesive for direct pulp capping.

Fusion Bond 7 Warning: Fusion Bond 7 / Fusion Self Etch Bond adhesive is an irritant. Contact with the skin, mucous membranes or eyes should be avoided. If case of skin contact, immediately wash with soap and water. If the material should come into contact with the eyes, immediately rinse with copious amounts of water for at least 15 minutes and consult a physician or ophthalmologist. In rare cases, contact with the skin may lead to a sensitization towards methacrylates. Commercial medical gloves do not provide protection against the sensitizing effects of methacrylate.

Fusion Bond 7 Storage Conditions: Store at temperature between 10° to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Fusion Bond 7 Shelf Life: 3 years from the date of manufacturing.

To see our full range of products: Click Here

Related Keywords: Self-Etch Bonding Agent - Fusion Bond 7 | Prevest DenPro, Fusion Bond 7 composition, Fusion Bond 7 product description, Fusion Bond 7 indications, Fusion Bond 7 instructions, Fusion Bond 7 price, Fusion Bond 7 online, Buy Fusion Bond 7, Fusion Bond 7 prevest denpro, Fusion Bond 7 price online

The post Self-Etch Bonding Agent - Fusion Bond 7 | Prevest DenPro appeared first on Prevest DenPro Limited.

3D Resins Brouchure

prevest_admin — Thu, 09 Mar 2023 07:11:38 +0000

3D Resins

Click on any product below to see the broucher

The post 3D Resins Brouchure appeared first on Prevest DenPro Limited.

Light Curing Glass Ionomer Composite Cement - FUSION I-SEAL | Prevest DenPro

prevest_admin — Sat, 04 Mar 2023 09:59:14 +0000

Light Curing Glass Ionomer Composite Cement - FUSION I-SEAL | Prevest DenPro

Fusion i-Seal Product Description: Light Curing Glass Ionomer Composite Cement. Fusion I-Seal single component, light cured glass ionomer cement for lining, extended fissure sealing and smaller lesions.

Fusion i-Seal Composition: Urethane Dimethacrylate resin, Bisphenol A Glycidyle Methacrylate, Barium Sulphate, FluoroAluminoSilicate Glass Powder, Silanated Barium Glass Powder, Amorphous Fumed Silica, Photoinitiators and Stabilizers.

Fusion i-Seal Indications:

♦ Lining under all kinds of filling materials

♦ Extended fissure sealing

♦ Restoration of smaller lesions.

Fusion i-Seal Instructions For Use: Thoroughly clean and air dry the cavity. Apply material to the cavity directly with the help of applicator tip. Do not exceed the thickness of 1mm. Light cure for 30- 40 sec using standard curing light and proceed with standard restoration technique.

Fusion i-Seal Warning: Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.

Fusion i-Seal Contraindications: Fusion I–Seal is contraindicated for use in patients with known allergies to methacrylate or any other if its components.

Fusion i-Seal Storage Conditions: Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

Fusion i-Seal Shelf Life: 3 years from the date of manufacturing.

Fusion i-Seal Disposal Conditions: To be disposed off based on the prevailing rules of the country in which it is used.

To see our full range of products: Click Here

Related Keywords: Light Curing Glass Ionomer Composite Cement - FUSION I-SEAL | Prevest DenPro, Fusion i-Seal composition, Fusion i-Seal indications, Fusion i-Seal instructions, Fusion i-Seal price, Fusion i-Seal online, Buy Fusion i-Seal, Fusion i-Seal prevest denpro, Fusion i-Seal price online

The post Light Curing Glass Ionomer Composite Cement - FUSION I-SEAL | Prevest DenPro appeared first on Prevest DenPro Limited.

Best Bioceramic Root Canal Sealer: Cerafil RCS

prevest_admin — Fri, 02 Dec 2022 07:46:23 +0000

Best Bioceramic Root Canal Sealer: Cerafil RCS

Cerafil RCS Product Description: Cerafill RCS root canal filling and sealing material is a ready to use injectable premixed filling and sealing material which is based on the bioceramic technology. It is a alumina free calcium silicate based material with excellent handling characteristics and superior physical properties. It is a radiopaque material which requires water to set and harden.

(more…)

The post Best Bioceramic Root Canal Sealer: Cerafil RCS appeared first on Prevest DenPro Limited.